Transmission

Clutch

~2min read

Overview - Flywheel and Dual Clutch

Note

All assembly work and tightening specifications are outlined in the "S tronic Transmission" repair manual.

Clutch

1 - Flywheel

  • Removing and installing, refer to → S tronic Transmission Internal Components; Rep. Gr.30; Clutch; Flywheel, Removing and Installing

2 - Clutch Cover

  • There are different versions depending on the date of manufacture, with or without a thrust washer (-item 7-), allocation, refer to the Parts Catalog.
  • Removing and installing, refer to → S tronic Transmission Internal Components; Rep. Gr.30; Clutch; DSG Clutch, Removing or → S tronic Transmission Internal Components; Rep. Gr.30; Clutch; Dual Clutch, Installing.

3 - Bolt

  • Tightening specification and sequence, refer to → S tronic Transmission Internal Components; Rep. Gr.30; Clutch; Overview - Flywheel and Dual Clutch.

4 - O-Ring

  • Replacing

5 - Dual Clutch

  • Refer to the Parts Catalog because there are different versions depending on the date of manufacture.
  • Removing and installing, refer to → S tronic Transmission Internal Components; Rep. Gr.30; Clutch; DSG Clutch, Removing or → S tronic Transmission Internal Components; Rep. Gr.30; Clutch; Dual Clutch, Installing.
  • Always perform the necessary "Guided Functions" on the Vehicle Diagnostic Tester after replacing the dual clutch, refer to → Chapter "Transmission Guided Functions".

6 - Transmission Housing

7 - Thrust Washer

  • Depending on the date of manufacture, clutch cover allocation, refer to the Parts Catalog.

8 - Ball Bearing

  • For the input shaft
  • Replacing, refer to → S tronic Transmission Internal Components; Rep. Gr.35; Input Shaft.

9 - Locking Ring

  • For ball bearing
  • Replacing

10 - Locking Ring

  • For the dual clutch
  • Replacing

11 - Shaft Seal

  • For the input shaft
  • Replacing, refer to → S tronic Transmission Internal Components; Rep. Gr.35; Input Shaft; Input Shaft Seal, Replacing.

12 - Bolt

  • Quantity of 4 for 6 and 8 -Cylinder Engines
  • Tightening specification, refer to → S tronic Transmission Internal Components; Rep. Gr.30; Clutch; Overview - Flywheel and Dual Clutch.

Flywheel, Removing and Installing

  • The transmission is removed.

Note

All assembly work and tightening specifications are outlined in the "S tronic Transmission" repair manual.

Description of the procedure, refer to → S tronic Transmission Internal Components; Rep. Gr.30; Clutch; Flywheel, Removing and Installing.

S tronic Clutch, Removing

  • The transmission is removed.

Note

All assembly work and tightening specifications are outlined in the "S tronic Transmission" repair manual.

Description of the procedure, refer to → S tronic Transmission Internal Components; Rep. Gr.30; Clutch; DSG Clutch, Removing.