Do It Yourself
Equipment
In this manual: Do It Yourself
~2min read
Warning triangle
Applies to: vehicles with warning triangle
.81.png)
Fig. 193 Luggage compartment lid: warning triangle
The warning triangle placed in the vehicle at the factory is located in the luggage compartment.
- To remove the warning triangle, press the retainer in the direction of the arrow
fig. 193 and fold the holder down.
The luggage compartment lid is only designed to hold the warning triangle offered by the Audi Genuine Accessories program.
Vehicle tool kit
.82.png)
Fig. 194 Luggage compartment: vehicle tool kit
The vehicle tools and vehicle jack are stored in the luggage compartment under the floor cover.
- Lift the cargo floor by the plastic handle.
- Hook the handle into the luggage compartment weather strip.
- Turn the handle counter-clockwise and remove the cover or the spare tire.
- Unhook the cargo floor before closing the rear lid.
WARNING
Improper use of the vehicle jack can cause serious personal injuries.
- Never use the screw driver hex head to tighten wheel bolts, since the bolts cannot attain the necessary tightening torque if you use the hex head, potentially causing an accident.
- The factory-supplied jack is intended only for your vehicle model. Under no circumstances should it be used to lift heavy vehicles or other loads; you risk injuring yourself.
- Never start the engine when the vehicle is raised, which could cause an accident.
- Support the vehicle securely with appropriate stands if work is to be performed underneath the vehicle; otherwise, there is a potential risk for injury.
- Never use the jack supplied with your Audi on another vehicle, particularly on a heavier one. The jack is only suitable for use on the vehicle it came with.
Tips
The vehicle jack in your vehicle is maintenance- free.
Was this page helpful?