Body

Overview - Cover and Cushion

~9min read

Overview - Cover and Cushion, 3-Seat Rear Bench

Overview - Cover and Cushion, 3-Seat Rear Bench

1 - Seat Frame

2 - Cushion Clip

  • For attaching the seat cover to the seat frame
  • Replace
  • Install at the same location with Upholstery Clip Pliers -VAG1634-.

3 - Cushion Clip

  • For attachment of seat cover to seat cushion
  • Replace
  • Install at the same location with Upholstery Clip Pliers -VAG1634-.

4 - Wire

  • Embedded in the foam of the seat cushion
  • For attachment of seat cover to seat cushion

5 - Contour Wire

  • Inserted in the pocket of the seat cover
  • For attachment of seat cover to seat cushion

6 - Seat Cover

  • Seat cover and cushion, removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Rear Bench Seat".
  • Seat cover and cushion, removing and installing. Refer to → Chapter "Cover and Cushion, Separating".
  • Allocation. Refer to the Parts Catalog.
  • Make sure there are no folds after installing

7 - Molding

  • Sewn into seat cover
  • For attaching the seat cover to the seat frame
  • Make sure is fits correctly on the seat frame

8 - Seat Cushion

  • Seat cover and cushion, removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Rear Bench Seat".
  • Seat cover and cushion, removing and installing. Refer to → Chapter "Cover and Cushion, Separating".
  • Allocation. Refer to the Parts Catalog.

Overview - Cover and Cushion, 2-Seat Rear Bench

Overview - Cover and Cushion, 2-Seat Rear Bench

1 - Seat Frame

2 - Cushion Clip

  • For attaching the seat cover to the seat frame
  • Replace
  • Attach back at the same location when installing

3 - Cushion Clip

  • For attachment of seat cover to seat cushion
  • Replace
  • Install at the same location with Upholstery Clip Pliers -VAG1634-.

4 - Wire

  • Embedded in the foam of the seat cushion
  • For attachment of seat cover to seat cushion

5 - Contour Wire

  • Inserted in the pocket of the seat cover
  • For attachment of seat cover to seat cushion

6 - Seat Cover

  • Seat cover and cushion, removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Rear Bench Seat".
  • Seat cover and cushion, removing and installing. Refer to → Chapter "Cover and Cushion, Separating".
  • Allocation. Refer to the Parts Catalog.
  • Make sure there are no folds after installing

7 - Molding

  • Sewn into seat cover
  • For attaching the seat cover to the seat frame
  • Make sure is fits correctly on the seat frame

8 - Seat Cushion

  • Seat cover and cushion, removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Rear Bench Seat".
  • Seat cover and cushion, removing and installing. Refer to → Chapter "Cover and Cushion, Separating".
  • Allocation. Refer to the Parts Catalog.

Overview - Cover and Cushion, Fixed Rear Seat Backrest

Overview - Cover and Cushion, Fixed Rear Seat Backrest

1 - Clamping Strip

  • Sewn into backrest cover
  • For engaging the backrest cover in the backrest seat frame

2 - Backrest Cover

  • Removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Fixed Rear Seat Backrest".
  • Backrest cover and cushion, separating and assembling. Refer to → Chapter "Cover and Cushion, Separating".

3 - Molding

  • Sewn into backrest cover
  • For engaging the backrest cover in the backrest seat frame

4 - Backrest Cushion

  • Removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Fixed Rear Seat Backrest".
  • Backrest cover and cushion, separating and assembling. Refer to → Chapter "Cover and Cushion, Separating".

5 - Headrest Guide

  • With locking spring
  • Quantity: 3
  • Always installed on the rear seat backrest on the right side
  • Removing and installing. Refer to → Chapter "Headrest Guide, Removing and Installing, Standard/Sport Seat/Super Sport Seat".

6 - Headrest Guide

  • With the headrest height adjustment button
  • Quantity: 3
  • Always installed on the rear seat backrest on the left side
  • Removing and installing. Refer to → Chapter "Headrest Guide, Removing and Installing, Standard/Sport Seat/Super Sport Seat".

7 - Backrest Frame

8 - Contour Wire

  • Pushed into the pocket of the backrest cover
  • For attachment of backrest cover to backrest cushion

9 - Cushion Clip

  • For attachment of backrest cover to backrest cushion
  • Replace
  • Install at the same location with Upholstery Clip Pliers -VAG1634-.

10 - Wire

  • Embedded in the foam of the backrest cushion
  • For attachment of backrest cover to backrest cushion

Overview - Cover and Cushion, Divided Rear Seat Backrest

Overview - Cover and Cushion, Divided Rear Seat Backrest

1 - Backrest Cover

  • Backrest cover and cushion, removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Divided Rear Seat Backrest".
  • Backrest cover and cushion, separating and assembling. Refer to → Chapter "Cover and Cushion, Separating".
  • Allocation. Refer to the Parts Catalog.
  • Make sure there are no folds after installing

2 - Cushion Clip

  • For attachment of backrest cover to backrest cushion
  • Replace
  • Install at the same location with Upholstery Clip Pliers -VAG1634-.

3 - Wire

  • Embedded in the foam of the backrest cushion
  • For attachment of backrest cover to backrest cushion

4 - Contour Wire

  • Pushed into the pocket of the backrest cover
  • For attachment of backrest cover to backrest cushion

5 - Backrest Frame

  • Removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Divided Rear Seat Backrest".

6 - Upper Center Cushion

  • Removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Divided Rear Seat Backrest".

7 - Backrest Cushion

  • Backrest cover and cushion, removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Divided Rear Seat Backrest".
  • Backrest cover and cushion, separating and assembling. Refer to → Chapter "Cover and Cushion, Separating".
  • Allocation. Refer to the Parts Catalog.

8 - Molding

  • Sewn into backrest cover
  • For attaching the backrest cover on the backrest frame
  • Make sure it fits correctly inside the backrest frame

9 - Lower Center Cushion

  • Removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Divided Rear Seat Backrest".

Overview - Cover and Cushion (Backrest with Pass-Through)

Overview - Cover and Cushion (Backrest with Pass-Through)

1 - Lower Center Cushion

  • Removing and installing. Refer to → Chapter "Lower Center Cushion, Removing and Installing".
  • Engage the cushion to the pass-through door and press on it until it clicks into place

2 - Backrest Cover

  • Backrest cover and cushion, removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Divided Rear Seat Backrest".
  • Backrest cover and cushion, separating and assembling. Refer to → Chapter "Cover and Cushion, Separating".
  • Allocation. Refer to the Parts Catalog.
  • Make sure there are no folds after installing

3 - Cushion Clip

  • For attachment of backrest cover to backrest cushion
  • Replace
  • Install at the same location with Upholstery Clip Pliers -VAG1634-.

4 - Wire

  • Embedded in the foam of the backrest cushion
  • For attachment of backrest cover to backrest cushion

5 - Contour Wire

  • Pushed into the pocket of the backrest cover
  • For attachment of backrest cover to backrest cushion

6 - Backrest Frame

  • Removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Divided Rear Seat Backrest".

7 - Upper Center Cushion

  • Removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Divided Rear Seat Backrest".

8 - Backrest Cushion

  • Backrest cover and cushion, removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Divided Rear Seat Backrest".
  • Backrest cover and cushion, separating and assembling. Refer to → Chapter "Cover and Cushion, Separating".
  • Allocation. Refer to the Parts Catalog.

9 - Clamping Strip

  • Sewn into backrest cover
  • For attaching the backrest cover on the backrest frame

Overview - Cover and Cushion, Super Sport Seat

Overview - Cover and Cushion, Super Sport Seat

1 - Lower Center Cushion

  • Removing and installing. Refer to → Chapter "Lower Center Cushion, Removing and Installing".
  • Engage the cushion to the pass-through door and press on it until it clicks into place

2 - Backrest Cover

  • Backrest cover and cushion, removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Divided Rear Seat Backrest".
  • Backrest cover and cushion, separating and assembling. Refer to → Chapter "Cover and Cushion, Separating".
  • Allocation. Refer to the Parts Catalog.
  • Make sure there are no folds after installing

3 - Cushion Clip

  • For attachment of backrest cover to backrest cushion
  • Replace
  • Install at the same location with Upholstery Clip Pliers -VAG1634-.

4 - Wire

  • Embedded in the foam of the backrest cushion
  • For attachment of backrest cover to backrest cushion

5 - Contour Wire

  • Pushed into the pocket of the backrest cover
  • For attachment of backrest cover to backrest cushion

6 - Backrest Frame

  • Removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Divided Rear Seat Backrest".

7 - Upper Center Cushion

  • Removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Divided Rear Seat Backrest".

8 - Backrest Cushion

  • Backrest cover and cushion, removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Divided Rear Seat Backrest".
  • Backrest cover and cushion, separating and assembling. Refer to → Chapter "Cover and Cushion, Separating".
  • Allocation. Refer to the Parts Catalog.

9 - Clamping Strip

  • Sewn into backrest cover
  • For attaching the backrest cover on the backrest frame

Overview - Cover and Cushion, Multi-contour Seat

Overview - Cover and Cushion, Multi-contour Seat

1 - Backrest Cover

  • Backrest cover and cushion, removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Multi-contour Seat".
  • Backrest cover and cushion, separating and assembling. Refer to → Chapter "Cover and Cushion, Separating".

2 - Cushion Clip

  • For attachment of backrest cover to backrest cushion
  • Replace
  • Install at the same location with Upholstery Clip Pliers -VAG1634-.

3 - Backrest Frame

4 - Backrest Cushion

  • Backrest cover and cushion, removing and installing. Refer to → Chapter "Cover and Cushion, Removing and Installing, Multi-contour Seat".
  • Backrest cover and cushion, separating and assembling. Refer to → Chapter "Cover and Cushion, Separating".

5 - Molding

  • Sewn into backrest cover
  • For engaging the backrest cover in the backrest seat frame

Overview - Headrest Cover and Cushion

Overview - Headrest Cover and Cushion

1 - Headrest Support

2 - Cushion

  • Removing and installing. Refer to → Chapter "Headrest Cover and Cushion, Removing and Installing".

3 - Cover

  • In vehicles with Comfort version, not separable from the cushion
  • Removing and installing. Refer to → Chapter "Headrest Cover and Cushion, Removing and Installing".

4 - Locking Strip