Chassis

Overview - Front Brake Caliper

~2min read
010203040502418N·mlb·ft
Tightening torque found on this page

Overview - Front Brakes, 1LA/1LJ

Overview - Front Brakes, 1LA/1LJ

1 - Brake Caliper

2 - Guide Pin

  • Quantity: 2
  • Replacing. Refer to → Chapter "Bearing Bushing and Guide Pin, Replacing, Steel Brakes 1LA/1LJ".

3 - Bearing Bushing

  • Quantity: 2
  • Replacing. Refer to → Chapter "Bearing Bushing and Guide Pin, Replacing, Steel Brakes 1LA/1LJ".

4 - Seal

5 - Brake Caliper Piston

  • Removing and installing. Refer to → Chapter "Brake Caliper Piston, Removing and Installing, 1LA/1LJ"
  • Coat with a thin layer of lithium grease. Refer to Parts Catalog.

6 - Protective Cap

  • When damaged, install the complete repair kit. Refer to the Parts Catalog.

Overview - Front Brake Caliper, 1LF/1LL

Overview - Front Brake Caliper, 1LF/1LL

1 - Brake Caliper

2 - Bearing Bushing

  • Quantity: 2
  • Replace if damaged. Refer to → Chapter "Bearing Bushing and Guide Pin, Replacing, Steel Brakes 1LF/1LL"

3 - Protective Cap

  • Quantity: 2
  • Push on the bearing bushing

4 - Seal

  • Quantity: 2
  • Coat with a thin layer of lithium grease. Refer to Parts Catalog.

5 - Brake Caliper Piston

  • Quantity: 2
  • Removing and installing. Refer to → Chapter "Brake Caliper Piston, Removing and Installing, 1LF/1LL".
  • Coat with a thin layer of lithium grease. Refer to Parts Catalog.

6 - Protective Cap

  • Quantity: 2
  • When damaged, install the complete repair kit. Refer to the Parts Catalog.
  • Coat with a thin layer of lithium grease. Refer to Parts Catalog.

Overview - Front Brake Caliper, 1LU/1LM/1LX/1LW/1LN

Overview - Front Brake Caliper, 1LU/1LM/1LX/1LW/1LN

1 - Brake Caliper

2 - Seal

  • Quantity: 6
  • Coat with a thin layer of lithium grease. Refer to Parts Catalog.

3 - Brake Caliper Piston

  • Quantity: 6
  • Removing and installing. Refer to → Chapter "Brake Caliper Piston, Removing and Installing, 1LU/1LM/1LX/1LN/1LW".
  • Coat with a thin layer of lithium grease. Refer to Parts Catalog.

4 - Protective Cap

  • Quantity: 6
  • When damaged, install the complete repair kit. Refer to the Parts Catalog.
  • Coat with a thin layer of lithium grease. Refer to Parts Catalog.

Caution

The guide pin for the brake pads may only be loosened on brake calipers for the ceramic brakes "PR-1LW".

Tightening specification for the guide pins -arrows-"1LW brake" 24 N·m.

A46-10356