Cadillac CTS Quiz
Keys, Doors, and Windows

Setting the Power Liftgate Intermediate Mode

In this manual: Keys, Doors, and Windows
Introduction — 6In Brief — 59Keys, Doors, and Windows — 64Seats and Restraints — 66Storage — 15Instruments and Controls — 169Lighting — 22Infotainment System — 95Climate Controls — 10Driving and Operating — 120Vehicle Care — 170Technical Data — 7Customer Information — 48OnStar — 35
~1min read

To change the liftgate stop position:

1. Turn the liftgate switch to either the MAX, or the ¾ mode position and power open the liftgate.

2. Stop the liftgate movement at the desired height by pressing any button that operates the power liftgate, or the touch pad.

Manually adjust the liftgate position if required.

3. Press and hold the button on the liftgate adjacent to the latch until the turn signals flash and a beep sounds to indicate that the new setting is recorded.

When power opened with the ¾ mode selected, the liftgate stops at the new set position.

If an audible and visual response is not received when setting the intermediate stop position, the liftgate height is below the ¾ open height minimum, approximately 1.52m(5 ft) at the edge of the liftgate.

Test yourself

A quick Cadillac CTS quiz: every answer comes with an explanation and a link to the manual page.