Cadillac CTS Quiz
Lighting

Flash-to-Pass

In this manual: Lighting
Introduction — 6In Brief — 59Keys, Doors, and Windows — 64Seats and Restraints — 66Storage — 15Instruments and Controls — 169Lighting — 22Infotainment System — 95Climate Controls — 10Driving and Operating — 120Vehicle Care — 170Technical Data — 7Customer Information — 48OnStar — 35
~1min read

This feature allows the high-beam headlamps to be used to signal the driver in front of you that you want to pass.

Pull and hold the turn signal/lane change lever toward you to use this feature. When this is done the following will occur:

- If the headlamps are off or in low-beam mode, the high-beam headlamps will turn on. They will stay on as long as the lever is held there. Release the lever to turn them off.

- If the headlamps are already in high-beam mode, they will remain on high beam.

Test yourself

A quick Cadillac CTS quiz: every answer comes with an explanation and a link to the manual page.