Cadillac SRX Quiz
Keys, Doors, and Windows

Setting the Power Liftgate 3/4 Mode

In this manual: Keys, Doors, and Windows
Introduction — 5In Brief — 53Keys, Doors, and Windows — 58Seats and Restraints — 63Storage — 22Instruments and Controls — 126Lighting — 21Infotainment System — 106Climate Controls — 10Driving and Operating — 94Vehicle Care — 105Service and Maintenance — 8Technical Data — 7Customer Information — 25OnStar — 9
~1min read

To change the liftgate stop position.

1. Turn the liftgate switch to either the MAX, or the 3/4 mode position and power open the liftgate.
2. Stop the liftgate movement at the desired height by pressing any liftgate switch. Manually adjust the liftgate position if required.
3. Press and hold the button on the liftgate next to the latch until the turn signals flash and a beep sounds to indicate that the new setting is recorded.

When power opened with the 3/4 mode selected, the liftgate stops at the new set position.

If you do not receive the audible and visual feedback when setting the intermediate stop position, you are attempting to set the height below the 3/4 open height minimum (approximately 1.52m or 5 ft).

The liftgate cannot be set below that minimum and the new setting will not be recorded.

Test yourself

A quick Cadillac SRX quiz: every answer comes with an explanation and a link to the manual page.