Cadillac SRX Quiz
Instruments and Controls

Universal Remote System Operation

In this manual: Instruments and Controls
Introduction — 5In Brief — 53Keys, Doors, and Windows — 58Seats and Restraints — 63Storage — 22Instruments and Controls — 126Lighting — 21Infotainment System — 106Climate Controls — 10Driving and Operating — 94Vehicle Care — 105Service and Maintenance — 8Technical Data — 7Customer Information — 25OnStar — 9
~1min read
1special tools

Using the Universal Remote System

Press and hold the appropriate Universal Remote system button for at least half of a second.

The indicator light will come on while the signal is being transmitted.

Erasing Universal Remote System Buttons

All programmed buttons should be erased when the vehicle is sold or the lease ends.

To erase all programmed buttons on the Universal Remote system device:

1. Press and hold down the two outside buttons until the indicator light begins to flash. This should take about 10 seconds.

2. Release both buttons.

Reprogramming a Single Universal Remote System Button

To reprogram any of the three Universal Remote system buttons:

1. Press and hold the desired Universal Remote system button. Do not release the button.

2. The indicator light will begin to flash after 20 seconds. Without releasing the button, proceed with Step 1 under “Programming the Universal Remote System.” If you have questions or need help programming the Universal Remote system, call 1-800-355-3515 or go to www.homelink.com. You may also call the customer assistance phone number under Customer Assistance Offices (U.S. and Canada) or Customer Assistance Offices (Mexico).

Test yourself

A quick Cadillac SRX quiz: every answer comes with an explanation and a link to the manual page.