Floor Air Outlet Replacement

Removal Procedure

1. 1
   Remove the instrument panel assembly. Refer to Instrument Panel Assembly Replacement.

   

2. 2
   Remove the instrument panel wiring harness (2) from the instrument panel tie bar (1).

Disconnect the electrical connectors.

3. Remove the instrument panel tie bar (2).

• Remove the 4 instrument panel tie bar bolts (3, 4).
• Remove the 2 instrument panel tie bar nuts (1).

1. 1
   Remove the heater wiring harness.

   

2. 2
   Remove the floor air outlet (2).

Remove the 6 floor air outlet bolts (1).

Installation Procedure

Caution: Refer to Fastener Caution in the Preface section.

1. Install the floor air outlet (2).

Install the 6 floor air outlet bolts (1) and tighten to 2,5 N·m.

1. 1
   Install the heater wiring harness.

   

2. 2
   Install the instrument panel tie bar (2).

• Install the 4 instrument panel tie bar bolts (3, 4) and tighten to 22 N·m.
• Install the 2 instrument panel tie bar nuts (1) and tighten to 9 N·m.

4. Attach the instrument panel wiring harness (2) to the instrument panel tie bar (1).

Connect the electrical connectors.

5. Install the instrument panel assembly. Refer to Instrument Panel Assembly Replacement.