Mirrors

Specifications

Inside Rearview Mirror Schematics

Outside Rearview Mirror Schematics

Outside Rearview Mirror Replacement

Preliminary Procedure

1. 1
   Remove the front side door trim. Refer to Front Side Door Trim Replacement.
2. 2
   Remove the front side door upper trim cover. Refer to Front Side Door Upper Trim Cover Replacement.
3. 3
   Outside Rearview Mirror Mount Plate Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten 9 N·m

2. Outside Rearview Mirror

Tip

Disconnect electrical connector.

Outside Remote Control Rearview Mirror Switch Replacement

Preliminary Procedure

1. 1
   Remove front side door trim. Refer to Front Side Door Trim Replacement.
2. 2
   Remove front side door window switch bezel. Refer to Front Side Door Window Switch Bezel Replacement.
3. 3
   Side Window Switch Bezel
4. 4
   Power Mirror Switch

Procedure

1. 1
   Using a plastic pry tool, gently pry on the sides to release the switch.
2. 2
   Disconnect the electrical connector.

Outside Rearview Mirror Motor Replacement

Preliminary Procedure

Remove the outside rearview mirror glass. Refer to Outside Rearview Mirror Glass Replacement.

1. Outside Rearview Mirror Motor Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten 3 N·m.

2. Outside Rearview Mirror Motor

Tip

Disconnect the electrical connector.

Outside Rearview Mirror Glass Replacement

Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section.

Outside Rearview Mirror Glass

Procedure

1. Release the mirror glass backing from the mirror housing by pulling outward.

Tip

Disconnect the power wire harness electrical connector.

Outside Rearview Mirror Housing Replacement

Preliminary Procedure

Remove outside rearview mirror glass. Refer to Outside Rearview Mirror Glass Replacement.

1. Outside Rearview Mirror Housing Screw (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten 2,5 N·m

2. Lower Outside Rearview Mirror Housing Screw

Tighten 2,5 N·m

3. Outside Rearview Mirror Housing

Tip

Disconnect electrical connector.

Inside Rearview Mirror Replacement

Preliminary Procedure

1. 1
   Remove the outside moisture cover. Refer to Windshield Outside Moisture Sensor Cover Replacement
2. 2
   Adjust the mirror to the full upward position.

Inside Rearview Mirror Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten 8 N·m

Inside Rearview Mirror

Tip

Slide the mirror in an upward motion in order to remove.