Shock Absorber Replacement

Removal Procedure

1. 1
   Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. 2
   Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
3. 3
   Support the rear axle with a tall jack stand near the shock absorber.

   

4. 4
   Remove the upper shock absorber bolts (1).

   

5. 5
   Remove the lower shock absorber bolt (1).

Installation Procedure

1. Position the shock absorber to the vehicle.

Caution: Refer to Fastener Caution in the Preface section.

1. 1
   Install NEW upper shock absorber bolts (1) and tighten to 100 N·m.

   

2. 2
   Install NEW lower shock absorber bolt (1) and tighten to 150 N·m + 60°.
3. 3
   Remove the jack stand.
4. 4
   Install the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
5. 5
   Lower the vehicle.