Chevrolet Cruze Owners Manual

StabiliTrak® System

~2min read

The vehicle has a vehicle stability enhancement system called StabiliTrak. It is an advanced computer controlled system that assists with directional control of the vehicle in difficult driving conditions.

StabiliTrak activates when the computer senses a difference between the intended path, and the direction the vehicle is actually traveling. StabiliTrak selectively applies braking pressure at any one of the vehicle's brakes to help steer the vehicle in the intended direction.

StabiliTrak is on automatically whenever the vehicle is started. To assist with directional control of the vehicle, the system should always be left on.

TCS/StabiliTrak Light
TCS/StabiliTrak Light

When the stability control system activates, This also occurs when traction control is activated. flashes on in the instrument cluster. This also occurs when traction control is activated.

A noise may be heard or vibration may be felt in the brake pedal. This is normal. Continue to steer the vehicle in the intended direction.

If there is a problem detected with StabiliTrak, SERVICE STABILITRAK is displayed on the Driver Information Center (DIC). When this message is displayed and/or is safe to drive but the system is not operational. comes on and stays on, the vehicle is safe to drive but the system is not operational.

Driving should be adjusted accordingly.

If the system: comes on and stays on, reset the system:
1. Stop the vehicle. 2. Turn the engine off and wait 15 seconds.

3. Start the engine.

If a speed above 20 km/h (13 mph), see your dealer for service. still comes on and stays on at a speed above 20 km/h, see your dealer for service.

TCS/StabiliTrak Button
TCS/StabiliTrak Button

is on the console.

StabiliTrak Off Light
StabiliTrak Off Light
TCS Off Light
TCS Off Light

StabiliTrak can be turned off if needed by pressing and holding and until come on in the instrument cluster. and When StabiliTrak is turned off, the system will not assist with directional control come on in the instrument cluster. When StabiliTrak is turned off, the system will not assist with directional control of the vehicle or limit wheel spin. Driving should be adjusted accordingly.

Press and release the system back on. again to turn the system back on.

If cruise control is being used when StabiliTrak activates, cruise control will automatically disengage. Press the cruise control button to reengage when road conditions allow.

Test yourself

A quick Chevrolet Cruze quiz: every answer comes with an explanation and a link to the manual page.