Chevrolet Cruze Repair Manual

Turn Signal Switch Replacement

8steps
~48min
2/5difficulty
010203040503022N·mlb·ft
Tightening torque found on this page
Done 0 of 8
Chevrolet Cruze. Turn Signal Switch Replacement

Preliminary Procedure

  1. Remove the steering column upper trim cover. Refer to Steering Column Upper Trim Cover Replacement.
  2. Remove the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement.

Turn Signal Switch

Procedure

  1. Disconnect any electrical connectors as needed.
  2. Release the plastic retaining tabs to release the turn signal switch from steering wheel inflatable restraint module coil.

Steering Wheel Replacement

Chevrolet Cruze. Steering Wheel Replacement

Prelimary Procedure

Remove the inflatable restraint steering wheel module. Refer to Steering Wheel Inflatable Restraint Module Replacement.

Steering Wheel Bolt

Caution: Refer to Fastener Caution in the Preface section.

Procedure

  1. Clean thread of the bolt.
  2. Apply locking compound to the thread. Refer to Adhesives, Fluids, Lubricants, and Sealers

Tighten 30 N·m

Steering Wheel

Procedure

  1. Disconnect electrical connectors as needed.
  2. Remove the steering wheel carefully.

Test yourself

A quick Chevrolet Cruze quiz: every answer comes with an explanation and a link to the manual page.