Storage
Additional Storage Features
In this manual: Storage
8steps
~48min
3/5difficulty
Done 0 of 8
- Cargo Tie-Downs

This vehicle is equipped with 12 fixed cargo tie-downs.
Any of the 12 locations inside the truck bed can be used. The maximum load per corner is 227 kg (500 lb).
Accessory Tie-Downs

Additional Accessory Tie-Down Points
Any of the nine holes inside the truck bed can be used for tie-downs.
The maximum load is 113 kg (250 lb) per tie-down.

To install:
- Insert a tie-down loop assembly until it is flush with the truck bed wall.
- Turn the tie-down loop clockwise to tighten. The tie-down will be hard to turn until the toggle moves past the installation point on the toggle guide.
- Fasten the tie-down firmly by hand only. Do not use tools.
To remove:
- Remove the tie-down loop completely by turning counterclockwise while holding the backing plate against the truck bed wall.
- Pull the backing plate away from the truck bed wall until a click is heard. This locks the toggle into position on the toggle guide.
- Push the backing plate against the truck bed wall. This allows the toggle nut to spin.
- Remove the backing plate, toggle guide, and toggle nut from the truck bed wall completely.
- Reinstall the tie-down loop through the backing plate into the toggle nut for reuse.
Was this page helpful?