Vehicle Care

Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps

9steps
~54min
2/5difficulty
Done 0 of 9

Base Level Taillamp Assembly

  1. Stoplamp/Taillamp/Turn Signal Lamp
  2. Back-Up Lamp
  3. Side Marker Lamp

Uplevel Taillamp Assembly

1500 shown 2500/3500 similar

  1. Back-Up Lamp

It is recommended to replace the grommets when replacing a bulb. See your dealer.

To replace one of these bulbs:

  1. Open the tailgate.
  2. Remove the two rear lamp assembly screws.
  3. Pull the rear lamp assembly outward and rearward away from the box side to remove it from the vehicle.
  4. Turn the bulb socket counterclockwise.
  5. Pull the bulb straight out from the socket.
  6. Replace the bulb and reverse Steps 1–5 to reinstall.