Head Restraint Removal and Reinstallation

The rear outboard head restraints can be removed if they interfere with the proper installation of the child restraint.

To remove the head restraint:

1. Partially fold the seatback forward. See Rear Seats on page 3-8 for additional information.

1. 1
   Press both buttons on the head restraint posts at the same time, and pull up on the head restraint.
2. 2
   Store the head restraint in the cargo area of the vehicle inside the cargo net.
3. 3
   When the child restraint is removed, reinstall the head restraint before the seating position is used.

Warning

With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/ spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly.

To reinstall the head restraint:

1. 1
   Insert the head restraint posts into the holes in the top of the seatback. The notches on the posts must face the driver side of the vehicle.
2. 2
   Push the head restraint down.

   If necessary, press the height adjustment release button to further lower the head restraint.

   See Head Restraints on page 3-2.

3. 3
   Try to move the head restraint to make sure that it is locked in place.