Vehicle Care
Hood
In this manual: Vehicle Care
2steps
~12min
1/5difficulty
Done 0 of 2
To open the hood:

- Pull the hood release handle inside the vehicle. It is on the lower left side of the instrument panel.

- Go to the front of the vehicle and push the secondary hood release lever up.

- Lift the hood and release the hood prop from the prop retainer, which is under the hood.

- Securely place the hood prop into the hood prop holder, at the rear passenger side of the engine compartment.
To close the hood:
- Before closing the hood, be sure all filler caps are on properly.
Then, lift the hood to relieve pressure on the hood prop.
Remove the hood prop from the prop holder in the rear passenger side of the engine compartment and secure it to the retainer on the underside of the hood. The prop rod must click into place when returning it to the retainer to prevent hood damage.
- Lower the hood 30 cm (12 in) above the vehicle and release it so it fully latches. Check to make sure the hood is closed and repeat the process if necessary.
Test yourself
A quick Chevrolet Spark quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?