Chevrolet Spark Quiz
Vehicle Care

License Plate Lamp

In this manual: Vehicle Care
Introduction — 1In Brief — 34Keys, Doors, and Windows — 27Seats and Restraints — 44Storage — 6Instruments and Controls — 42Lighting — 18Infotainment System — 38Climate Controls — 6Driving and Operating — 45Vehicle Care — 97Service and Maintenance — 9Technical Data — 5Customer Information — 25OnStar — 9
10steps
~60min
3/5difficulty
Done 0 of 10
Chevrolet Spark. License Plate Lamp

  1. Attachment Screws
  2. License Plate Bulb
  3. Bulb Socket

To replace a license plate lamp bulb:

  1. Remove the two screws (1) from the license plate lamp assembly.
  2. Turn and pull the license plate lamp assembly down.
  3. Turn the bulb socket (3) counterclockwise and pull it out of the lamp assembly.
  4. Pull the bulb (2) straight out of the socket.
  5. Push the new bulb into the socket.
  6. Install the bulb socket (3) by turning clockwise into the license plate lamp assembly.
  7. Replace the license plate lamp assembly by using the two screws to secure.

Replacement Bulbs

Chevrolet Spark. Replacement Bulbs

For replacement bulbs not listed here, contact your dealer.

Test yourself

A quick Chevrolet Spark quiz: every answer comes with an explanation and a link to the manual page.