Checks

HDi 90 and HDi 110 FAP engines

~1min read
  • Fill the fuel tank with at least fi ve litres of diesel.
  • Open the bonnet.
  • Depending on version, unclip the cover to gain access to the repriming pump.
  • Squeeze and release the repriming pump until fuel appears in the transparent pipe with the green connector.
  • Operate the starter until the engine starts.
  • Depending on version, put the cover back in position and clip it in place.
  • Close the bonnet.

If the engine does not start at the fi rst attempt, do not try again.

Operate the repriming pump again, then the starter.

Test yourself

A quick Citroen DS3 quiz: every answer comes with an explanation and a link to the manual page.