Removal and Installation — Brake Disc

Materials

Removal

Vehicles with Electric Brake Booster

1. Activate the brake Service Mode.
   Refer to: Brake Service Mode Activation and Deactivation (206-00 Brake System - General Information, General Procedures).

All vehicles

1. 1
   Remove the wheel and tire.
   Refer to: Wheels and Tires (204-04A Wheels and Tires, Removal and Installation).
2. 2

   NOTICE: Make sure that no load is applied to the brake hose.

   Remove the bolts and position the brake caliper and anchor plate aside.
   Torque: 81 lb-ft (110 N·m)

   

3. 3
   Remove the brake rotor.

   

Installation

1. 1
   Clean the brake rotor mating surfaces using a wire brush and the specified material.
   Material: Motorcraft® Metal Brake Parts Cleaner / PM-4-A, PM-4-B, APM-4-C

   

2. 2
   To install, reverse the removal procedure.

Vehicles with Electric Brake Booster

3. Deactivate the brake Service Mode.
   Refer to: Brake Service Mode Activation and Deactivation (206-00 Brake System - General Information, General Procedures).

All vehicles

4. Depress the brake pedal several times to verify proper brake system operation.