Removal and Installation - Rear Spoiler

Special Service Tools / General Equipment

Interior trim removal tool

Removal

1. 1
   Open the liftgate.

   

2. 2
   Release the clips and remove the liftgate upper trim panel.
   Use common equipment: interior trim removal tool.

   

3. 3
   Disconnect the electrical connector and disconnect the antenna knob.

   

4. 4
   Remove the spoiler from the liftgate brackets.
   Torque: 22 lb-in (2.5 N·m)

   

5. 5
   Remove the brackets.
   Torque: 53 lb-in (6 N·m)

   

6. 6
   Disconnect the wiring harness grommets and clip.

   

7. 7
   • Remove the spoiler assembly.

   • Disconnect the electrical connector and washer hose.

   

Installation

1. To install, reverse the removal procedure.