Ford Escort Quiz
OHV and HCS engines

Rocker gear - dismantling and reassembly

In this manual: OHV and HCS engines
Routine maintenance and servicing — 39OHV and HCS engines — 18CVH engines — 18Cooling, heating and ventilation systems — 15Carburettor fuel system — 19Bosch K-Jetronic and KE-Jetronic mechanical fuel injection systems — 25Central (single-point) Fuel Injection (CFI) system — 22Electronic Fuel Injection (EFI) system — 21Manifolds, exhaust and emission control systems — 9Starting and charging systems — 12Ignition systems — 9Braking system — 25Suspension and steering — 29Bodywork and fittings — 35Electrical system — 26Wirind diagrams — 13Reference — 6
~1min read

Dismantling 1 With the rocker assembly removed as described in Section 4, extract the split pin from one end of the rocker shaft (see illustration).

6.1 Rocker shaft assembly components
6.1 Rocker shaft assembly components 2 Take off the spring and plain washers from the end of the shaft. 3 Slide off the rocker arms, support pedestals and coil springs, keeping them in their originally fitted order. Clean out the oil holes in the shaft.

Reassembly
4 Apply engine oil to the rocker shaft before reassembling and make sure that the flat on the end of the shaft is to the same side as the rocker arm adjuster screws. This is essential for proper lubrication of the components.

Test yourself

A quick Ford Escort quiz: every answer comes with an explanation and a link to the manual page.