General Procedures - Group Flash Programming

Activation

1. 1
   Activate the flashing LEDs in the group to be programmed.
2. 2
   Locate the pattern programming diagrams on the built-in C4231.

   

3. 3
   To change the flash pattern of the grille, outside mirror and, if equipped, front auxiliary flashing light-emitting diodes (LEDs):
   

   • To scroll forward to the next pattern, apply 12 volts to pin 2 of the built-in C4231 for less than 1 second.

   • To return to the previous pattern, apply 12 volts to pin 2 of the built-in C4231 for more than 1 second.
4. 4
   To change the flash pattern of the rear lamp, high mount and on the trunk lid (underside) flashing light-emitting diodes (LEDs):
   

   • To scroll forward to the next pattern, apply 12 volts to pin 2 of the built-in C4231 for less than 1 second.

   • To return to the previous pattern, apply 12 volts to pin 2 of the built-in C4231 for more than 1 second.