Instrumentation and Warning Systems

Parking Aid Camera - Removal and Installation

4steps
~24min
2/5difficulty
Done 0 of 4

Removal

  1. Remove the liftgate trim panel.
    Refer to: Liftgate Trim Panel - 4-Door (501-08 Exterior Trim and Ornamentation, Removal and Installation).
    Refer to: Liftgate Trim Panel - 5-Door (501-08 Exterior Trim and Ornamentation, Removal and Installation).

  2. Remove the parking aid camera.
    1. Disconnect the parking aid camera electrical connector.
    1. Release the tab.
    1. Remove the parking aid camera.

Installation

  1. To install, reverse the removal procedure.
  2. The rear view camera is calibrated when the ignition is turned on.

Test yourself

A quick Ford Fiesta quiz: every answer comes with an explanation and a link to the manual page.