Ford Focus Quiz
Powertrain

Accessory Drive Belt Tensioner

In this manual: Powertrain
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
5steps
~30min
2/5difficulty
0102030405097N·mlb·ft
Tightening torque found on this page
Done 0 of 5
Removal and Installation
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
  2. Remove the 2 bolts and accessory drive belt splash shield.
    • To install, tighten to 9 N·m.
  3. Using the hex feature, rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt from the tensioner.
  1. NOTE: The accessory drive belt tensioner must be replaced as a complete unit.

    Remove the 2 bolts and the accessory drive belt tensioner.

    • To install, tighten to 25 N·m.
  2. To install, reverse the removal procedure.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.