Electrical

Battery Tray

4steps
~24min
2/5difficulty
01020304050129N·mlb·ft
Tightening torque found on this page
Done 0 of 4
Removal and Installation
  1. Remove the battery. For additional information, refer to Battery in this section.
  2. Remove the 3 nuts from the battery tray.
    • To install, tighten to 12 N·m.
  3. Remove the 4 wire harness pushpins from the battery tray and remove the tray.
  4. To install, reverse the removal procedure.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.