Ford Focus Quiz
Body

Console - Floor

In this manual: Body
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
13steps
~78min
3/5difficulty
Done 0 of 13

Item Part Number Description
1 04567 Floor console finish panel
2 W707938 Floor console rear screws (2 required)
3 672A40 Floor console middle screw covers (2 required)
4 W707938 Floor console middle screws (2 required)
5 W705681 Floor console pushpin retainers (3 required)
6 W707938 Floor console front screws (2 required)
7 045A36 Floor console

Removal and Installation All vehicles
  1. Lift the park brake lever upward.
  2. Place the vehicle in NEUTRAL.
Manual transmission
  1. Unscrew and remove the gearshift lever knob from the gearshift lever.
All vehicles
  1. Lift the floor console storage compartment door.
  2. Detach the park brake lever boot from the park brake lever.
  3. Remove the floor console finish panel.
    • Lift upward on the rear of the floor console finish panel to release the floor console finish panel clips.
    • If equipped, disconnect the electrical connector.
    • Slide the park brake lever boot and the floor console finish panel over the park brake lever.
  4. Position the front seats forward.
  5. Remove the 2 floor console rear screws.
  6. Position the front seats rearward.
  7. Remove the 2 floor console middle covers and screws.
  8. Remove the 3 floor console pushpin retainers.
  9. Remove the 2 floor console front screws.
  10. Remove the floor console.
    • Disconnect the electrical connector.
  11. To install, reverse the removal procedure.
    • Make sure to align the trim panel retaining clips to the retaining clip holes in the floor console.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.