Ford Focus Quiz
Powertrain

Coolant Pump

In this manual: Powertrain
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
8steps
~48min
2/5difficulty
0102030405043N·mlb·ft
Tightening torque found on this page
Done 0 of 8
Material
Item Specification
Motorcraft® Premium Gold Engine Coolant VC-7-B (US); CVC-7-B (Canada) WSS-M97B51-A1

Coolant Expansion Tank
Item Part Number Description
1 W701107 Coolant expansion tank bolt (2 required)
2 8C045 Coolant expansion tank



Coolant Pump
Item Part Number Description
3 W500221 Coolant pump pulley bolt (3 required)
4 8509 Coolant pump pulley
5 W500015 Coolant pump bolt (3 required)
6 8501 Coolant pump
7 8507 Coolant pump O-ring seal

Removal and Installation
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
  2. Remove the 2 bolts and position aside the coolant expansion tank.
    • To install, tighten to 4 N·m.
  3. Loosen the 3 coolant pump pulley bolts.
  4. Remove the accessory drive belt. For additional information, refer to Section 303-05.
  5. Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.
  6. Remove the 3 coolant pump pulley bolts and the pulley.
    • To install, tighten to 20 N·m.
  7. NOTICE: Make sure the coolant pump is correctly seated to the engine block before installing and tightening the fasteners, or damage to the coolant pump may occur.

    Remove the 3 coolant pump bolts and the coolant pump.

    • To install, tighten to 10 N·m.
  8. NOTE: Install a new coolant pump O-ring seal and lubricate with clean engine coolant.

    To install, reverse the removal procedure.

  1. Fill and bleed the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.