Ford Focus Quiz
Powertrain

Engine Mount

In this manual: Powertrain
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
6steps
~41min
3/5difficulty
1special tools
0102030405043N·mlb·ft
Tightening torque found on this page
Done 0 of 6
Special Tool(s)
Engine Support Bar 303-F072

Coolant Expansion Tank
Item Part Number Description
1 W701107 Coolant expansion tank bolt (2 required)
2 8C045 Coolant expansion tank



Engine Mount
Item Part Number Description
1 W520214 Engine mount nut (2 required)
2 W710332 Engine mount bolt (2 required)
3 W712325 Engine mount stud bolt
4 6F012 Engine mount

Removal and Installation
  1. Remove the 2 expansion tank bolts.
    • To install, tighten to 4 N·m.
  2. Lift the coolant expansion tank off of the engine mount stud bolt and position it aside.
  3. Install the Engine Support Bar.
  1. Remove the 2 engine mount nuts.
    • To install, tighten to 90 N·m.
  2. Remove the 2 bolts, stud bolt and the engine mount.
    • To install, tighten to 48 N·m.
  3. To install, reverse the removal procedure.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.