Maintenance

Engine oil check

~1min read
Do not use oil additives or other engine treatments. Under certain conditions, they could damage the engine. Note: The oil consumption of new engines reaches its normal level after approximately 5 000 kilometres (3 000 miles). Checking the oil level Make sure that the level is between the MIN and the MAX marks. Note: Check the level before starting the engine. Note: Make sure that your vehicle is on level ground. Note: Oil expands when it is hot. The level may therefore extend a few millimetres beyond the MAX mark.

Remove the dipstick and wipe it with a clean, lint free cloth. Replace the dipstick and remove it again to check the oil level.

If the level is at the MIN mark, top up immediately.

Topping up

Only top up when the engine is cold.

If the engine is hot, wait 10 minutes for the engine to cool down.

Do not remove the filler cap when the engine is running.

Remove the filler cap.

Do not top up further than the MAX mark.

Top up with fluid that meets the Ford specification. See Technical specifications.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.