Exhaust Flexible Pipe

This procedure is for all Partial Zero Emissions Vehicle (PZEV) . The non-PZEV exhaust flexible pipe is part of the catalytic converter. For additional information, refer to Catalytic Converter in this section.

1. 1
   With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
2. 2
   NOTICE: Do not excessively bend or twist the exhaust flexible pipe. Failure to follow these instructions may cause damage to the exhaust flexible pipe.

   Support the exhaust flexible pipe with a support wrap or suitable splint.

1. 1
   Remove and discard the 2 exhaust flexible pipe-to-muffler and tailpipe assembly nuts.

   • Discard the gasket.

   • To install, tighten to 47 N·m.
2. 2
   Remove and discard the 2 exhaust flexible pipe-to-catalytic converter nuts and remove the exhaust flexible pipe.

   • Discard the gasket.

   • To install, tighten to 47 N·m.
3. 3
   To install, reverse the removal procedure.

   • Install new gaskets and nuts.