Ford Focus Quiz
Powertrain

Gearshift Lever

In this manual: Powertrain
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
4steps
~24min
2/5difficulty
010203040501511N·mlb·ft
Tightening torque found on this page
Done 0 of 4
Removal and Installation
Item Part Number Description
1 7217 Gearshift knob
2 — Gearshift lever nut (4 required)
3 7K387 Gearshift lever
4 7E395 Shift cable (part of 7E395 assembly)
5 7E395 Selector cable (part of 7E395 assembly)

  1. Remove the gearshift lever knob.
    • To install, tighten to 15 N·m.
  2. Remove the floor console. For additional information, refer to Section 501-02.
  3. Remove the shift cable ends from the gearshift levers in the following sequence.
    1. Carefully pry the gearshift cables from the shift levers.
    1. Pull back on abutment sleeve and lift cable out of shifter.
  4. Remove the 4 gearshift lever bolts and the gearshift lever.
    • To install, tighten to 9 N·m.
  1. To install, reverse the removal procedure.
    • Adjust the gearshift cables. For additional information, refer to Section 308-00.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.