Ford Focus Quiz
Powertrain

Inertia Fuel Shutoff (IFS) Switch

In this manual: Powertrain
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
4steps
~24min
2/5difficulty
0102030405021N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Item Part Number Description
1 W710254 Pin-type retainer (2 required)
2 5402344 RH A-pillar lower trim panel
3 W504169 Inertia Fuel Shutoff (IFS) switch bolt (2 required)
4 9341 IFS switch
5 14A464 IFS switch electrical connector

Removal and Installation
  1. Remove the 2 pin-type retainers and the RH A-pillar lower trim panel.
  2. Disconnect the Inertia Fuel Shutoff (IFS) switch electrical connector.
  3. NOTICE: Do not overtighten the fasteners or damage to the switch will occur.

    Remove the 2 bolts and the IFS switch.

    • To install, tighten to 2 N·m.
  4. To install, reverse the removal procedure.
    • If necessary, reset the IFS switch after the installation has been completed.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.