Ford Focus Quiz
Powertrain

Powertrain Control Module (PCM)

In this manual: Powertrain
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
9steps
~54min
2/5difficulty
0102030405086N·mlb·ft
Tightening torque found on this page
Done 0 of 9

Item Part Number Description
1 14A464 PCM electrical connector (3 required)
2 W505423 PCM bolt (2 required)
3 12A650 PCM

Removal
  1. NOTE: PCM installation DOES NOT require new keys or programming of keys, only a Parameter Reset of the Passive Anti-Theft System (PATS) .

    Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation (PMI) procedure. For additional information, refer to Section 418-01.

  2. Remove the Air Cleaner (ACL) outlet pipe and the ACL assembly. For additional information, refer to Section 303-12.
  3. Disconnect the 3 PCM electrical connectors.
  4. Remove the 2 bolts and the PCM.
Installation
  1. Install the PCM and the 2 bolts.
    • Tighten to 8 N·m.
  2. Connect the 3 PCM electrical connectors.
  3. Install the ACL outlet pipe and the air cleaner assembly. For additional information, refer to Section 303-12.
  4. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation (PMI) procedure. For additional information, refer to Section 418-01.
  5. Reprogram the PATS . Carry out the Parameter Reset procedure. For additional information, refer to Section 419-01B.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.