Ford Focus Quiz
Chassis

Steering Wheel Rotation Sensor

In this manual: Chassis
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
4steps
~24min
2/5difficulty
Done 0 of 4
Special Tool(s)
Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool


Item Part Number Description
1 — Steering wheel rotation sensor electrical connector (part of 19D887)
2 W506942 Steering wheel rotation sensor bolt (2 required)
3 3F818 Steering wheel rotation sensor

Removal and Installation
  1. Remove the steering column shroud. For additional information, refer to Section 211-04.
  2. Disconnect the steering wheel rotation sensor electrical connector.
  3. Remove the 2 bolts and the steering wheel rotation sensor.
  4. To install, reverse the removal procedure.
    • Carry out the IVD Initialization sequence. Follow the scan tool directions.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.