Ford Focus Quiz
Chassis

Wheel Speed Sensor - Rear

In this manual: Chassis
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
4steps
~24min
2/5difficulty
0102030405097N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Item Part Number Description
1 — Wheel speed sensor bolt (part of 2C204)
2 2C204 Wheel speed sensor

Removal and Installation
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
  2. Remove the wheel speed sensor bolt.
    • To install, tighten to 9 N·m.
  3. NOTE: Not all the clips are part of the sensor assembly and may not be reusable.

    Disconnect the wheel speed sensor electrical connector.

    • Remove the sensor by detaching the pin-type retainer and pulling the sensor grommets out of the clips.
  4. To install, reverse the removal procedure.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.