Ford Focus Quiz
Body

Wiper Mounting Arm and Pivot Shaft

In this manual: Body
Vehicle - General — 4Accessories — 40Body — 237Chassis — 113Electrical — 19HVAC — 44Powertrain — 292
4steps
~24min
2/5difficulty
0102030405086N·mlb·ft
Tightening torque found on this page
Done 0 of 4
Removal and Installation
  1. Remove the cowl panel grille. For additional information, refer to Section 501-02.
  2. Remove the cowl panel support brace.
  1. Disconnect the windshield wiper motor electrical connector.
  1. Remove the 3 bolts and the wiper mounting arm and pivot shaft assembly.
    • To install, tighten to 8 N·m.
  2. To install, reverse the removal procedure.

Test yourself

A quick Ford Focus quiz: every answer comes with an explanation and a link to the manual page.