Rocker Panel Molding Removal and Installation

Removal

1. 1

   NOTICE: Before starting any service procedure in this section, REFER to the Safety Warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury.

   Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
2. 2
   Remove the clips.

   

3. 3
   
   Remove the rocker panel molding.
   

   • Release the clips on the sides of the sill molding.

   • Slide the rocker panel trim down and remove it.

   

Installation

1. To install, reverse the removal procedure.