Ford Mustang Quiz
Fuel System

Accelerator Cable - 3.8L

In this manual: Fuel System
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal and Installation

1. Push the accelerator cable nylon bushing out of the accelerator pedal and shaft arm.

Accelerator Cable - 3.8L

2. Remove the bolts retaining the accelerator cable to the dash panel.

Accelerator Cable - 3.8L

3. Disconnect the accelerator cable from the throttle body by rotating the throttle body full open and aligning the cable with the release slot.

Accelerator Cable - 3.8L

4. Disconnect the accelerator cable from the retaining bracket by compressing the locking tabs and back-feeding the cable through the bracket and out of the engine compartment.

5. To install, reverse the removal procedure.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.