Ford Mustang Quiz
Brake System

Caliper (Removal and Installation)

In this manual: Brake System
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read
1special tools

Special Tool(s)

 Rear Caliper Piston Adjuster 206-026 (T87P-2588-A)

Removal

1. Raise the vehicle on a hoist.

2. Remove the wheel and tire assembly.

3. Disengage the parking brake cable end from the parking brake lever arm.

Caliper

4. Remove the parking brake cable retaining clip.

Caliper

5. Remove the parking brake cable and conduit.

Caliper

6. Remove the rear disc brake caliper brake hose bolt.

Caliper

7. Remove the rear brake pin retainers (2N386) and remove the caliper.

Caliper

Installation

1. NOTE: Use new copper washers.

Follow the removal procedure in reverse order.

  • Bleed the brake system.
Caliper
Caliper

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.