Ford Mustang Quiz
Manual Transmission, Clutch and Transfer Case

Dowels - Flywheel

In this manual: Manual Transmission, Clutch and Transfer Case
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal

1. NOTE: Take care not to damage the flywheel dowel holes or the surface areas around the flywheel dowel during removal.

Remove the flywheel dowels by using a drift pin where the flywheel dowel is installed in an open hole and a pair of locking pliers where the flywheel dowel is installed in a blind hole.

Dowels -Flywheel

Installation

1. NOTE: Care should be taken to drive the flywheel dowel squarely into place until it is fully seated and to not damage the surrounding surface areas.

Install all flywheel dowels by driving them into place using a brass or plastic mallet.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.