Evaporator Core Housing

Disassembly

1. Remove the evaporator core housing. For additional information, refer to Evaporator Core Housing in this section.

2. Remove the foam weather seal.

3. Remove the screws and remove the heater core.

4. Remove the screws and remove the A/C recirculating air duct.

5. Remove the vacuum reservoir.

1. Disconnect the vacuum line.

2. Remove the screw.

6. Remove the heater air damper door motor.

1. Disconnect the vacuum lines.

2. Loosen the nuts and unclip the motor.

7. Release the vacuum harness from the housing.

8. Remove the screws and remove the resistor.

9. Disconnect the jumper wire.

10. Disconnect the main harness.

11. Remove the screws.

12. Remove the blower motor.

13. Remove the screws and remove the duct.

14. Remove the mounting brackets.

Assembly

1. To assemble, reverse the disassembly procedure.