Front Bumper Cover

Removal and Installation

NOTE: Mustang shown, GT and Cobra similar.

1. Remove the pin-type retainers and the radiator upper sight shield.

2. Remove the two pin-type retainers (one each side).

3. Remove the four front bumper cover nuts (two each side).

4. Remove the lower bumper cover pin-type retainers.

5. Remove the four headlamp mounting clips.

6. Disconnect the parking lamp and the headlamp electrical connectors (two each) and remove the two headlamps.

7. Remove the pin-type retainers.

8. If equipped, remove the pin-type retainers.

9. If equipped, disconnect the fog lamp electrical connectors.

10. Lift up on the tabs and remove the front bumper cover.

11. To install, reverse the removal procedure.