Headliner

Removal

1. Remove the two upper quarter panels. For additional information, refer to Trim Panel-Upper Quarter in this section.

2. Remove the two windshield side garnish mouldings.

3. Remove the two sun visors.

1. Remove the six screws.

2. Position the sun visors aside.

• If equipped, disconnect the electrical connectors.

4. Remove the two pin-type retainers.

5. CAUTION: Folding the headliner will result in damage to the headliner.

Remove the headliner.

1. Disconnect the electrical connector.

2. Release the wiring harness locators.

3. Remove the headliner.

Installation

1. CAUTION: Folding the headliner will result in damage to the headliner.

Install the headliner.

1. Position the headliner.

• Apply Headliner Adhesive F1VY-19562-A meeting Ford specification WSSM2G355- B, to the headliner using the existing pattern.

2. Connect the electrical connector.

3. Engage the wiring harness locators.

2. Install the two pin-type retainers.

3. Install the two sun visors.

1. Position the sun visors.

• If equipped, connect the electrical connectors.

2. Install the screws.

4. Install the two windshield side garnish mouldings.

5. Install the two upper quarter trim panels. For additional information, refer to Trim Panel-Upper Quarter in this section.