Ford Mustang Quiz
Transmission

Hill start assist

In this manual: Transmission
Introduction — 1Child Safety — 4Safety Belts — 5Personal Safety System — 1Supplementary Restraints System — 6Keys and Remote Control — 4MyKey — 7Locks — 4Security — 3Steering Wheel — 1Wipers and Washers — 3Lighting — 9Windows and Mirrors — 6Instrument Cluster — 4Information Displays — 4Climate Control — 6Seats — 7Universal Garage Door Opener (If Equipped) — 3Auxiliary Power Points — 1Storage Compartments — 1Starting and Stopping the Engine — 5Fuel and Refueling — 8Transmission — 5Brakes — 4Traction Control — 1Stability Control — 1Parking Aids — 3Cruise Control — 1Driving Aids — 1Load Carrying — 1Towing — 6Convertible Top (If Equipped) — 4Driving Hints — 5Roadside Emergencies — 5Customer Assistance — 9Fuses — 3Maintenance — 19Vehicle Care — 12Wheels and Tires — 10Capacities and Specifications — 8Accessories — 1Ford Extended Service Plan — 1Audio System — 6SYNC® — 8Navigation System (If Equipped) — 10Appendices — 1Scheduled Maintenance — 1
~4min read

This feature makes it easier to pull away when the vehicle is on a slope without the need to use the parking brake. When this feature is active, the vehicle will remain stationary on the slope for two to three seconds after you release the brake pedal. This allows you time to move your foot from the brake to the accelerator pedal. The brakes are released automatically once the engine has developed sufficient drive to prevent the vehicle from rolling down the slope. This is an advantage when pulling away on a slope, (for example from a car park ramp, traffic lights or when reversing uphill into a parking space).

This feature is activated automatically on any slope that can result in significant vehicle rollback.

Using Hill Start Assist

1. Press the brake pedal to bring the vehicle to a complete standstill.

Keep the brake pedal pressed.
2. If the sensors detect that the vehicle is on a slope, the hill start assist feature will be activated automatically.
3. When you remove your foot from the brake pedal, the vehicle will remain on the slope without rolling away for approximately two or three seconds. This hold time will automatically be extended if you are in the process of driving off.
4. Drive off in the normal manner. The brakes will be released automatically.

Disabling and Enabling the Hill Start Assist Feature

Your vehicle comes with hill start assist already enabled. If desired, you can disable the feature by following the procedure below.

The following procedure must be completed within 45 seconds or the process will have to be repeated. Begin this procedure with the ignition turned off. This procedure is for both disabling and enabling the hill start assist system.

1. Apply the parking brake to make sure the vehicle is not moving.
2. Turn the ignition on.
3. Place the vehicle in neutral gear.
4. Slowly press and release the brake pedal five times – make sure the brake pedal is completely released each time.
5. Rotate the steering wheel at least one full turn to the right and return the steering wheel to the original starting position.
6. Rotate the steering wheel at least one full turn to the left and return the steering wheel to the original starting position.
7. Slowly press and release the brake pedal five times – ensure the brake pedal is completely released each time.

When the procedure has been completed successfully, the ABS icon in the instrument cluster will flash:

• three times indicating that the feature has been disabled.
• twice indicating it has been enabled.

Once the feature is programmed as desired, it will remain in that mode until the above procedure is repeated.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.