Input Shaft and Bearing

Special Tool(s)

	Input Shaft Seal Replacer 308-220 (T94P-7025-AH)
	Pinion Bearing Cone Remover 205-D002 (D79L-4621-A) or Equivalent

Disassembly

1. Using the special tool and a press, remove the input bearing (7025).

2. Remove the bearing race and the end play selective shims.

3. Remove the input shaft seal (7052).

Assembly

1. Using the special tool, install the input shaft seal.

2. NOTE: In installing a new input shaft seal as part of a transmission overhaul, do not install the end play selective shims at this time.

Instal the end play selective shims and the bearing race.

3. Using a press and a capped length of pipe, install the input bearing.