Ford Mustang Quiz
Suspension

Link - Stabilizer Bar

In this manual: Suspension
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal

1. Raise the vehicle on a hoist. For additional information, refer to Section.

2. NOTE: Spring is removed for clarity.

Link - Stabilizer Bar

Installation

1. NOTE: The nuts on the stabilizer bar links are of a torque prevailing design. New nuts must be used during installation.

NOTE: To install the nuts, first install the nut until snug using the hex holding feature to prevent the stabilizer bar link ball joint from turning. Final tighten the nuts using a socket and a torque wrench.

To install, reverse the removal procedure.

Link - Stabilizer Bar

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.