Ford Mustang Quiz
Brake System

Module

In this manual: Brake System
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

Removal

1. Remove the hydraulic control unit (HCU). Refer to Hydraulic Control Unit .

2. Remove the pump motor electrical connector.

Module

3. Remove the anti-lock-brake control module screws.

Module

4. Remove the anti-lock-brake control module from the HCU.

Installation

1. NOTE: The brake system must be bled after the HCU is installed or replaced.

To install, reverse the removal procedure.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.