Ford Mustang Quiz
Steering System

Pulley - CIII Pump

In this manual: Steering System
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read
2special tools

Special Tool(s)

Pump Pulley Replacer 211-185 (T91P-3A733-A)
Pump Pulley Remover 211-016 (T69L-10300-B)

Removal

1. Remove the drive belt.

2. Raise and support the vehicle.

3. Using the special tool, remove the pulley.

  • Inspect the pulley for paint marks in the web area near the hub. If there are two paint marks, discard and install a new pulley. If there is no paint or one paint mark, use a paint pencil to mark the web area of the pulley near the hub.
Pulley - CIII Pump

Installation

1. Using the special tool, install a new pulley.

Pulley - CIII Pump

2. Install the drive belt.

3. Lower the vehicle.

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.