Ford Mustang Quiz
Driveline

Removal

In this manual: Driveline
Service Information — 34Suspension — 63Driveline — 80Brake System — 74Steering System — 42Engine — 329Automatic Transmission — 84Manual Transmission, Clutch and Transfer Case — 64Exhaust System — 8Fuel System — 39Climate Control System — 76Instrumentation and Warning Systems — 25Battery and Charging System — 19Audio Systems — 14Lighting — 24Electrical Distribution — 8Electronic Feature Group — 11Body — 173Frame and Mounting — 6General Information — 1
~1min read

1. Raise and support the vehicle.

2. Remove the wheel and tire assembly.

3. Remove the rear brake disc (2C026).

4. Remove the differential housing cover (4033) and drain the lubricant. For additional information, refer to Differential Housing Cover in this section.

5. Remove the differential pinion shaft (4211).

1. Remove the differential pinion shaft lock bolt (4241).

2. Remove the differential pinion shaft.

Axle Shaft

6. CAUTION: Do not damage the rubber O-ring in the axle shaft groove.

Remove the U-washer (4N237).

1. Push the axle shafts (4234) inboard.

2. Remove the U-washer.

Axle Shaft

7. CAUTION: Damage to the rear brake anti-lock sensor (2C190) may occur if it is not removed before the axle shaft.

Carefully remove the rear brake anti-lock sensor.

Axle Shaft

8. CAUTION: Do not damage the wheel bearing oil seal.

Remove the axle shaft.

Axle Shaft

Test yourself

A quick Ford Mustang quiz: every answer comes with an explanation and a link to the manual page.